HindBond Heat Champ is a heat-resistant synthetic solvent-borne rubber-based adhesive designed for applications where strong bonding and resistance to elevated temperatures are required. It can withstand temperatures of up to 170°C and is particularly suitable for bonding laminates to wood and PVC laminates to laminate.
Its formulation is also suitable for curved and vertical surface applications, making Heat Champ a practical adhesive solution for furniture manufacturing, woodworking, interior applications, and other bonding requirements where heat resistance is important. Heat Champ Adhesives by HindBond is a trusted Heat Resistant Adhesive Manufacturer & Supplier Ahmedabad, offering strong rubber-based bonding up to 170°C for industrial and furniture applications
Heat Resistant Adhesive for Furniture Manufacturing
Heat plays an important role in the performance of adhesives used in furniture and interior applications. Standard adhesives may not be suitable for applications where bonded components are exposed to elevated temperatures.
HindBond Heat Champ is formulated for applications requiring heat resistance up to 170°C, while also providing strong adhesion on suitable laminate and wood-based substrates.
It is commonly used in furniture manufacturing for:
- Laminate-to-wood bonding
- PVC laminate-to-laminate bonding
- Curved furniture surfaces
- Vertical bonding applications
- Furniture panels and components
- Wood-based substrate applications
- High-temperature bonding requirements
The adhesive should be tested under the actual application conditions before large-scale production, as substrate, surface preparation, application method, pressure, temperature, and environmental conditions can influence final bonding performance.
Heat Champ Adhesive Applications
Laminate-to-Wood Bonding
Heat Champ can be used for bonding laminates to suitable wood-based substrates in furniture and woodworking applications. It is suitable for applications where reliable adhesion and heat resistance are required.
PVC Laminate-to-Laminate Bonding
The adhesive can also be used for PVC laminate-to-laminate applications, subject to substrate compatibility and appropriate surface preparation.
Curved Surface Applications
Furniture components often include curved or irregular surfaces where adhesive application can be more challenging. Heat Champ is designed to support bonding on suitable curved surfaces.
Vertical Surface Applications
Its adhesive properties make it suitable for selected vertical bonding applications where maintaining contact between the surfaces is important during installation.
High-Temperature Applications
Where the bonded assembly may experience elevated temperatures, Heat Champ provides heat resistance up to 170°C, subject to the specific application conditions.
Suitable Materials and Substrates
HindBond Heat Champ can be used for suitable bonding applications involving:
- Laminates
- Plywood
- BWR plywood
- BWP / marine plywood
- Veneer
- Particle board
- MDF
- Hard board
- Other suitable wood-based substrates
Substrate compatibility should be verified before production use, particularly when bonding different or non-porous materials.
Key Benefits of Heat Champ Adhesive
Heat Resistance up to 170°C
Heat Champ is formulated to withstand temperatures of up to 170°C, making it suitable for furniture and industrial applications where heat resistance is an important requirement.
Suitable for Curved and Vertical Surfaces
The adhesive can be used for suitable curved and vertical bonding applications, making it useful for furniture components with non-flat surfaces.
Fast Drying
Heat Champ provides a drying time of approximately 4–6 minutes at room temperature, allowing suitable assemblies to proceed without unnecessarily long waiting periods.
Strong Laminate Adhesion
The formulation is designed for bonding suitable laminates to wood-based substrates and PVC laminate-to-laminate applications.
Benzene-Free Formulation
According to the product specifications, Heat Champ is benzene-free. However, it is classified as highly flammable, so appropriate handling, ventilation, storage, and fire-safety precautions are essential.
How to Use Heat Champ Adhesive
For best results, proper surface preparation and application are important.
Step 1: Prepare the Surfaces
Ensure the surfaces to be bonded are clean, dry, and properly levelled. Remove dust, dirt, oil, moisture, and other contaminants that could affect adhesion.
Step 2: Stir Before Use
Stir the adhesive thoroughly before application to maintain uniformity.
Step 3: Apply the Adhesive
Apply the adhesive first to the non-porous surface and then to the porous surface, following the recommended application process.
Step 4: Allow Drying
Allow the adhesive to dry for approximately 4–6 minutes at room temperature.
Step 5: Assemble and Apply Pressure
Align the surfaces carefully and apply appropriate pressure to achieve proper contact between the bonded surfaces.
Step 6: Allow Final Bonding
Although the adhesive dries within a few minutes, the final bond is achieved in approximately 24 hours.
Actual performance can vary depending on substrate, application conditions, temperature, surface preparation, and bonding process. Testing the adhesive under the intended production conditions is recommended.
Heat Resistant Adhesive Manufacturer and Supplier in India
HindBond is a heat resistant adhesive manufacturer and supplier in Ahmedabad, Gujarat, offering adhesive solutions for furniture, woodworking, and industrial applications.
Heat Champ is manufactured for customers requiring a specialised adhesive for heat-resistant bonding, laminate applications, curved surfaces, and vertical applications.
For furniture manufacturers, OEMs, carpenters, interior contractors, distributors, and industrial users, product selection should be based on the substrate, application method, required temperature resistance, production conditions, and expected bonding performance.
Why Choose HindBond Heat Champ?
HindBond develops adhesive products for different woodworking, furniture, and industrial bonding requirements.
Heat Champ is designed specifically for applications where heat resistance, laminate bonding, and curved or vertical surface bonding are important.
HindBond's product range enables businesses to select adhesive solutions according to their individual application requirements rather than relying on a single adhesive for every bonding situation.
Heat Champ Adhesive Pack Sizes
Heat Champ is available in the following pack sizes:
- 500 ml
- 1 litre
- 5 litres
For commercial and industrial requirements, buyers can contact HindBond for product availability, bulk requirements, and dealer enquiries.
Heat Champ Adhesive Storage
Store Heat Champ in a dry location away from heat, direct sunlight, and open flames.
Keep the container tightly sealed after use.
Because Heat Champ is classified as highly flammable, keep the product away from ignition sources and follow appropriate workplace safety procedures during storage and application.
The recommended shelf life is 18 months from the date of manufacture when stored properly.
Frequently Asked Questions About Heat Champ Adhesive
What is Heat Champ Adhesive?
HindBond Heat Champ is a synthetic solvent-borne, rubber-based heat resistant adhesive designed for suitable furniture, woodworking, laminate, and industrial bonding applications.
How much heat can Heat Champ Adhesive withstand?
Heat Champ is formulated to withstand temperatures of up to 170°C, subject to the actual application and bonding conditions.